Electrode Foundry
By combining state-of-the-art facilities optimized for electrode production with a team of experienced experts
We promise to produce high-quality, customized electrodes.
The mixing process in which anode and cathode materials, coatings, and binders are mixed with a solvent to create a slurry by mixing them with a solvent.
The process of applying anode and cathode slurry to foil to a constant thickness Process of applying and drying both sides
Applying Pressure to Coated Foil Pressing process to reduce thickness and increase density
Process of cutting active material coated foil to a certain width
We maximize production efficiency by building a smart factory system that allows production data to be checked and tracked through MES that is linked to each production process in real time, and
We operate an advanced quality management system through IATF 16949 and ISO 14001 certifications.
01
Production Process DashboardComputerize every process to Schematic real-time data tracking and analysis
02
Visualize your dataIntuitive data interpretation and sophisticated visualizations for quick analysis
03
Monitoring anomaly detectionUpper/lower management limits set on production equipment Provide a tool to warn of deviations from the limit levels
Quality inspections are conducted at all stages from the stage of purchasing raw materials and materials to product development, production process, and shipment, and if nonconformities are found as a result of quality inspection, the relevant department is notified and the cause is analyzed and countermeasures are established through quality consultation.
We maintain stable quality and standardized standards without deviations through quality control activities.

This is an optical gauge that illuminates the measurement with a built-in high resolution industrial camera and measures the burr dimensions of the electrode from the transmitted image.

For the measurement of residual NMP in the electrode, residual NMP gasified by heating is passed through the column line to measure the concentration of the detected component.

After the import inspection of Al / Cu raw materials required for the electrode manufacturing process and all the electrode manufacturing processes, the produced electrodes are sampled to measure the tensile strength and bonding force.

Electrode manufacturing process The residual moisture in the electrode during the coating drying process is measured by temperature and time METHOD The result in PPM is measured by Kalbfischer titration.


Head Office : (27693)36-12, Yongsan Sandan 1-gil, Eumseong-eup, Eumseong-gun, Chungcheongbuk-do, Republic of Korea JR Energy Solution
Seoul Branch : (06777)5F, 32-4, Mabang-ro 6-gil, Seocho-gu, Seoul
JR Battery System : (15881)2F, 25-11, Gunpo Cheomdan Sandan 1-ro, Gunpo-si, Gyeonggi-do, Republic of Korea
TEL. 043-872-1150 / FAX. 043-872-1152
Enacted : December 31, 2025
JR Energy Solution Co., Ltd. (hereinafter referred to as the “Company”) protects the personal information of visitors, partners, and employees in accordance with relevant laws and regulations such as the Personal Information Protection Act, the Act on the Use and Protection of Credit Information, and the Act on Promotion of Information and Communications Network Utilization and Information Protection, and establishes the following policy to smoothly handle complaints related to personal information.
1. Purpose of Personal Information Processing
The Company processes personal information for the following purposes. The personal information being processed will not be used for purposes other than those listed below, and if the purpose of use is changed, necessary measures such as obtaining separate consent will be implemented in accordance with the Personal Information Protection Act.
2. Processing and Retention Period of Personal Information
The Company processes personal information for the following purposes:
Personal Information Retention Period
3. Items of Personal Information Processed
| Category | Personal Information Items | Purpose of Use | Retention and Use Period |
|---|---|---|---|
| Required | Name, gender, date of birth, mobile phone number, email, address | Identity verification, recruitment process, HR management, access control, complaint handling | Until the expiration of the personal information retention period |
| Optional | Education, work experience, certifications, family information | Reference materials for recruitment and HR management | Until the expiration of the personal information retention period |
| Unique Identification Information | Resident registration number, driver’s license number, passport number, alien registration number |
Compliance with legal obligations (salary, four major insurance programs, etc.) |
Until the statutory retention period |
| Sensitive Information | Fingerprint information (for access control) | Facility security and access control | Until the purpose of access control is achieved or the retention period expires |
4. Provision of Personal Information to Third Parties
The Company provides personal information to third parties only in cases falling under Articles 17 and 18 of the Personal Information Protection Act, such as when the data subject has given consent or when special provisions exist under applicable laws.
5. Outsourcing of Personal Information Processing
The Company may outsource personal information processing tasks to external professional service providers to ensure smooth access control operations and improve service quality.
The Company stipulates necessary matters to ensure the safe management of personal information in outsourcing contracts in accordance with Article 26 of the Personal Information Protection Act and supervises subcontractors accordingly.
| Contractor | Outsourced Services | Retention and Use Period |
|---|---|---|
| S-1 Corporation | Operation and management of access control systems | Until termination of the outsourcing contract or fulfillment of access control purposes (unless retention is required by applicable laws) |
| Scout Co., Ltd. | Employee and visitor identification and guidance |
6. Procedures and Methods for Destruction of Personal Information
The Company destroys personal information without delay when it becomes unnecessary due to expiration of the retention period or achievement of processing purposes.
Destruction Procedure
Destruction Method
7. Rights and Obligations of Data Subjects and Legal Representatives
8. Measures to Ensure the Security of Personal Information
Administrative Measures
Technical Measures
Physical Measures
9. Personal Information Protection Officer and Responsible Departments
| Category | Chief Privacy Officer | Privacy Manager | Personal Information & Grievance Officer |
|---|---|---|---|
| Department | Management Support | IT & Information Security Part | HR Team |
| Name | Doyup Kim, Executive Director | Younggyu Lee / Sungdeok Kim, Manager | Sunwoo Pyo, Manager / Kyungah Choi, Manager |
| Contact |
|
||
10. Remedies for Infringement of Rights
Data subjects may apply for dispute resolution or consultation regarding personal information infringement through the Personal Information Dispute Mediation Committee or the Korea Internet & Security Agency.
- Related Organizations
11. Fixed Video Information Processing Devices
The Company operates fixed video surveillance systems (CCTV) for facility safety, fire prevention, and crime prevention in accordance with Article 25(1) of the Personal Information Protection Act.
Details such as installation locations, recording scope, managers, and retention periods are provided in the separately established “Fixed Video Information Processing Device Operation and Management Policy.”
12. Notification of Changes to This Policy
This Personal Information Processing Policy shall take effect on January 1, 2026.
Any additions, deletions, or modifications to this policy will be announced on the Company website or through notices at least seven days prior to the effective date.
Enacted: 31 December 2025
JR Energy Solution Co., Ltd. (hereinafter referred to as "the Company") provides this policy to inform you how video data collected in public areas is operated and managed, and for what purposes.
1. Basis and Purpose of Video Device Installation
The Company installs and operates video processing devices in accordance with Article 25, Paragraph 1 of the Personal Information Protection Act for the following purposes:
2. Number of Devices, Installation Locations, and Coverage
The Company operates video devices in restricted and controlled areas of Plant 1 and Hwaseong Plant.
| Number of Devices | Installation Locations & Coverage |
|---|---|
| 85 units |
Plant 1: Manufacturing equipment areas, main walkways, shipping area Hwaseong: Hwaseong equipment areas, employee cafeteria |
3. Responsible Personnel & Access Rights
The Company has designated the following personnel to securely manage video devices and data.
| Role | Name | Position | Department | Contact |
|---|---|---|---|---|
| Data Manager | Kim Do-yeop | Head of Division | Management Support Division | 010-7654-9788 |
| Access Personnel | Lee Young-gyu | Team Leader | IT & Information Security Team | 010-3491-0221 |
| Kim Sung-duk | Officer | IT & Information Security Team | 010-9480-5155 |
4. Recording Hours, Retention Period, Storage Location, and Handling Method
| Recording Hours | Retention Period | Storage Location |
|---|---|---|
| 24 hours | 90 days from recording date | Server Room |
※ Handling: Usage for purposes other than intended, third-party disclosure, destruction, and access requests are recorded and managed. Upon expiration of the retention period, data is permanently deleted in a non-recoverable manner.
5. How and Where to Access Video Data
6. Requests for Viewing or Deletion by Data Subjects
Individuals may request to view, confirm, or delete personal video data at any time through the IT & Information Security Team. Requests are limited to data clearly involving the individual or necessary for the protection of life, body, or property. Required actions will be taken promptly upon request.
7. Measures to Ensure Video Data Security
Video data is securely managed through encryption and access control measures. Management measures include recording creation time, access purpose, personnel, and access time to prevent tampering. Additional secure physical storage is also provided.
8. This policy applies as of 1 January 2026.
The collection of email addresses posted on this website using automated programs or other technical means is strictly prohibited. Violations may be subject to criminal penalties under the Act on Promotion of Information and Communications Network Utilization and Information Protection.
Article 50-2 of the Act on Promotion of Information and Communications Network Utilization and Information Protection (Prohibition of Unauthorized Collection of Email Addresses)
1. No person may use programs or other technical devices to automatically collect email addresses from websites that explicitly prohibit such collection.
2. No person may sell or distribute email addresses collected in violation of Paragraph 1.
3. No person may use email addresses collected or distributed in violation of Paragraphs 1 and 2 for sending information.
ⓒ 2025 JR ENERGY SOLUTION. All rights reserved.